Most hunters don't set out to fill an entire wall with mounts. It usually starts with one shoulder mount hung flat against the drywall, and then a second good season happens, and suddenly there's a real space problem.
Finding workable multi-trophy wall display ideas becomes less of a decorating question and more of a practical one: how do you fit everything you've earned without the room looking cluttered or the mounts competing for attention?
It happens faster than most people expect. According to the National Deer Association's 2022-23 Deer Report, 17 percent of deer hunters took two or more deer that season alone, meaning a real share of hunters are bringing home more than one mountable trophy before the year is even over. Stretch that across a decade or two of hunting seasons, and even a modest success rate turns into a wall that needs a plan, not just a row of nails.
The fix isn't a bigger wall. It's a display system built to make one wall do the work of three.
How Pivoting Systems Free Up Wall Space for More Trophies
A trophy mounted flat against drywall only ever faces one direction, and it takes up every inch of space directly around it. Full Range Hanging Systems approach the problem differently by mounting the trophy on an arm that pivots 180 degrees in two separate places, so the same wall space can hold a mount angled toward the room instead of flush against it. That single change makes stacking multiple mounts in a smaller footprint workable.
Grand View Outdoors, an outdoor industry trade publication, has described Full Range as the pioneer of the 180-degree pivoting display for head-and-shoulder big-game mounts. That's worth noting as a claim from industry press rather than the company's own marketing.
The Corner System takes that pivoting idea a step further with a patent-pending design built specifically to turn dead wall space, the kind between two windows or tucked into a room corner, into usable display real estate. Add an adjustable tilt plate to any system for up to 15 degrees of downward angle, and even a mount hung higher on the wall can be tipped to face the room properly instead of staring at the ceiling.
Choosing the Right Arm Length for a Multi-Trophy Layout
Every Full Range wall system, whether it's the Single, Corner, Double, or Pedestal base, pairs with an arm sized to the space available. The 4-Arm System works well for tight groupings where mounts need to sit close together without crowding, while the 8-Arm System gives a mount more clearance to swing forward for a fuller presentation. The 10-Arm System is the right call when a trophy needs to clear a doorway trim, a window frame, or another nearby mount.
Planning a multi-trophy layout usually comes down to measuring the available run of wall first, then matching arm length to how much clearance each mount actually needs once it's angled out from the wall. Mixing arm lengths across a single wall, shorter near the corners and longer toward the center, is a common way to keep a growing collection from looking like it was hung in one afternoon with whatever was on hand.
Two Systems Built to Hold More Than One Mount at Once
For hunters who don't want to hang mounts one at a time, two systems handle multiple trophies from a single base. The Double System uses two 8-inch arms built from steel swing arms and steel plates to support two mounts up to 35 pounds each, and both arms pivot independently so the pair can be angled toward each other or spread wider depending on the space.
The Pedestal System takes a different approach entirely by skipping the wall altogether. It holds up to three shoulder mounts, each up to 30 pounds, on a single base that attaches to a flat surface like a whiskey barrel, a table, or a custom stand.
Each of the three arms pivots independently in two places, the same mobility built into the wall-mounted systems, so a hunter can angle each mount toward a different part of the room instead of lining all three up in a flat, identical row. For a room that's already run out of open wall, a pedestal setup turns a corner of floor space into room for three more trophies without drilling a single new hole.
Built for Growing Collections, Not Just One Mount
Full Range Hanging Systems started with a straightforward problem hunters kept running into: a flat-mounted trophy wastes wall space and only ever shows one angle. Every system since has been built around solving that same issue, whether that means pivoting a single mount into an odd corner or stacking three onto one pedestal.
That focus on flexibility is why the same lineup works just as well for a hunter with one mount as it does for a wall that's slowly filling up with a decade of hunts, wherever that wall happens to be.
Multi-Trophy Display Questions Answered
How much weight can a multi-trophy system hold?
It depends on the system. The Double System supports up to 35 pounds per mount (70 pounds total), while the Pedestal System holds up to three mounts at 30 pounds each for a 90-pound total capacity.
Do these systems require a wall stud?
Yes, for the wall-mounted models. Every wall system is engineered for lag screws driven into a wooden stud to reach its full weight capacity, and masonry anchors can substitute only if they carry an equal or higher weight rating.
Can different arm lengths be mixed on the same wall?
Yes. Since each base system pairs independently with a 4-, 8-, or 10-inch arm, a single wall can mix arm lengths to match the clearance each mount needs.
Does the tilt plate work with every system?
The adjustable tilt plate is available as an option across the Full Range lineup, adding up to 15 degrees of downward angle to whichever base system a mount is already paired with.
Start Planning Your Wall Before the Next Trophy Comes Home
A growing collection of mounts doesn't have to mean a cluttered wall or a trophy stuck in the garage waiting for space. Planning the layout around pivoting systems, the right arm lengths, and multi-mount bases like the Double and Pedestal Systems means there's room ready before the next hunt even happens.
Explore the full product lineup at Full Range Hanging Systems to start building a wall that can keep up with the collection.